suzuki intruder wont startlg refrigerator blinking 6 times
If it is, run a test and make sure that you are actually getting spark. 92 Suzuki intruder vs800. It will go to start like a pot pot then nothing any suggestions? by BRUMBEAR Fri Oct 18, 2013 4:11 pm, #3 Now you are ready to start cleaning things up. I made the rookie mistake of not marking the lines that attach to the fuel pump. Cheers Andy. Hes convincedits not the motorcracked piston ring, worn cylinder.or valve not seating. Bike just turns over and over but no start at all . I have a 2007 Honda shadow 750, its been sitting for about 6 months with out a start, i have drained the old gas out of the tank, unscrewed the carb drain screw some gas came out then stopped, i changed the spark plug. What else could be the problem.? Sir , i have a 2005 model herohonda karizma r. now it had a starting problems. Follow our articles tips on how to do compression and leak down tests. Engine did not turn over/ no sound or click of any kind. I turned it off then on again and there is no electricity going through the bike even though it has a brand new battery with a full charge. Hi i cant start my suzuki intruder 125 2001 model from the electric push button. Thanks. Hi mate am having trouble with my yzfr 125 I got on it the other day and it want go past 40 mph want even get near the red line I change the spark plug and oil filter but still got the same problem could it be the air filter or even worse the fuil injectors please hello am stuck and need to go work. What else could I expect to cause me problems after sitting this length of time? You can break these elements down and troubleshoot each one until you find the reason why your bike is not starting. helo. Whats wrong with my bike? Reversing the charger could blow the fuse. Three of four bad shape. Hi i have a suzuki gsxr 600 k6 in the shop , bike came in and the owner said the previous owner did bearings , big ends and mains , and he also did the head, he told me there was no compression, so as i opened the bike , i saw the timing was not set right, took out the motor , looked for bent valves and the was nothing, i re-seeted the valves , set the timing right, checked valve clearance and everything, bike does not want to start, injectors fuel pump everything 100%, but looking at the spark, took out one supressor plug and i fitted a new plug to see if it has spark, found that it only has spark when its not earthed , holding it close to the throttle body it sparks nice, holding it strait against the throttle body , then it does not have spark, can that be the problem why its not starting, and if so whats wrong? We suggest you to surf our . CDI ?? Then after I let it idle for a few minutes 3-5. 320-358-3409 or by email at techsupport@denniskirk.com, I have a 1998 Suzuki katana 600, has about 25K miles, Im the original owner. Bike has been sitting over winter, I dont know if be a new battery sort it or stator. I killed the power, and now the transmission wont shift (except 1st and neutral), the bike wont start, and the rear tire/break is still locked. Been running fine so far,,but iIve just owned it for about a week,,,It does need a good tuneup,it sat for awhile before I bought it! Make sure the cables are operating smoothly as well. it seized up , but then after a few more trys , it started but runs very ruff . Its whining now when turning the key on. Take a look at your float and make sure that it is installed correctly. Tomorrow new spark plugs and cleaning the air filters. A great place to start is at your spark plugs. I have removed the spark plug and had cleaned and after that for a day there was no problem. The lights come on, but nothing when trying to start. Honda xr125L. I rode it about 60 miles at end of season last year. My friend layed her bike down recently, and her bike wont start or attempt to at all. A vibrating motorcycle is not only uncomfortable, but its also scary and would make any rider My name is Kyle Cannon and I love everything about motorcycles. Also make sure that the bike is in neutral and that your kickstand is up. Remember that your bike needs four main things to run. Been banging my head now.for months. Also check to make sure the engine has sufficient compression to run. Just as satisfying is the deep rumble from the reverse taper . Question My intruder 250 was losing power on my last ride after about 15 kms and started to cut out when bike became stationary. When I took it off the lift, the rear tire was locked. Jon Manfrom Philly. Then let the carb dry. Our tech team can help you troubleshoot the issue. Thank you. Required fields are marked *. However, the problem is most likely electrical. $4,176. Instantly I lose all power. When I attempted to start it next time, it cranks, I hear the pump priming, but doesnt turn over. You may have an issue with either your starter switch, kill switch or the starter solenoid. Hi guys I have a yamaha vstar 650 that acts like it floods when sitting over night, I have to shut the petcock off when I shut her off and I have to fight to get it to fire up in the morning. Discussion, Rides/Events Calendar, Showcases, Reviews, Classifieds, Blogs, and Resources. Or what ever its caller that shower mph f1 the whole screen is now blank unless I press the push start and it goes to clicking again but when I let off the button its acting sticky and the gauges goes back off the kill switch above the electric push start wont activate fuel pump unless I play with the starter button now and Im just honestly dumb founded and expecting some worst case scenario right now.. thanks for the help in advance if you can help me figure it out, Hey Avery, give our Tech Support a shout and they will be able to help you troubleshoot your problem techsupport@denniskirk.com, I have a problem with my 2002 kawasaki ninja zx6r e10. For now, Im back to the air/fuel mixture on the bike. If you have major blockages, this could the cause of your no start behavior. It was very clean and I didn't muck with the jets. A better fuel pump is on the way. Suzuki intruder won't start? Theres only 3 or 4 lines but I havent found anyone who can help me put them back correctly. Filled tank, started but ran rough and had white smoke. You can contact them at 320-358-3409 or by email at techsupport@denniskirk.com. Got bike working after Duh! Id rather buy new then used. Hi, I have a gsxr400 gk71f. So since then I have purchased a new battery.and. Sure enough it started right up. It's not fuel injected and it wasn't a terrible fall. Please help. And I just replaced my neutral safety switch o ring and front blinkers and now wont start. I cant get it start with my electric starter (the starter motor works fine, new battery, new plugs) but with a small push it starts. If I turn the bike off. Next, you will want to check your ignition coil followed by the CDI box, rectifier/regulator and all other electrical components. I replaced the transistors on the spark unit. Ive got a carb issue. Not for months now. Ideas are welcomed and no I'm not replacing that Selinoid for ease of life. The bike is in 800 Suzuki intruder 1996. Reminder, the bike ran just fine before I run out of gas. I have a 1996 Yamaha Varago 1100 Then before starting do a dry run. i have a 1978 Kawasaki kz750, the engine wont fire up but will sit there and try to and tick while trying to turn on. Then narrowing it downor pointing me to the next direction. I tried to start it and it started for a second and died. My guess would be that a completely full tank is blocking off the vent tube. After 10 min. So could any one help me out to troubleshoot this problem. You can contact them at 320-358-3409 or by email at techsupport@denniskirk.com, Hi 97cbr900rr. Hi, My bud said the bike ran fine before sitting. 02:07 - Source: CNN. Any help? Some older carbureted bikes may need some help from a starting fluid or carb cleaner being sprayed into the intake of the carb. You get what you pay for, you want cheap youll get junk! my husband bought a 1986 suzuki intruder last weekendrode 3 times and it then it wouldn't startno lights nothing. If you dont have a multimeter, any autoparts store should be able to check it for you. Problem still has to be electrical. Or maybe the Air/Fuel ratio is messed up. Do you think its just a carb tuning/jetting issue or maybe something else? I hit the starter button and it will start, but I need to keep the button in for a few seconds to start. Its not fuel injected and it wasnt a terrible fall. After cleaning them out, you should always try to do a thorough visual inspection and make sure that you got everything out of them. 2022 Adelaide to Jindabyne & back on a 110cc Scooter. Try cleaning your carbs, check the air cleaner. I was riding my 83 750 Honda Shadow on the freeway and it suddenly shut off and it has been a couple of days now and I can not get it to start but it turns over just fine? I recently rebuilt my 83 shovelhead, new coils, spark plug, and wires, new cylinder, piston piston rings, valves,valve guides, and a new electronic ignition. Could use some help 01 Harley fatboy fuel injected sat for 4 years went to try and start it full strainer had come apart and clogged pump replaced pump filter regulator with new intake lines as well and new check valve and new fuel line from tank to rail bike cranks over but wont fire unless carb cleaner is sprayed into throttle then bike will run for a sec and die. Like u said i replaced it with a substitute starter motor. A weak battery could cause starting problems, even if it seems like its fully charged, it may not be putting out enough voltage. Wants to go.and doesnt. Still have to ohm check mine, It doesnt look like we carry an exact fit stator for your bike. Hey Robert, it does sound like an electrical problem. Please time Running out. Essentially, their Can A Loose Motorcycle Chain Cause Vibration? Hi my name is dean I have a yamaha yzf r1 bikes bean running fine till this afternoon it lost power got home switched off then got a bubbling noise from engine tryed to start her again wouldnt start a rotten smell of fuel could you point me in right direction or tell me what could be wrong?? Now it won't start, the electric start kicks but nothing. I have a 2012 Dyna Switchback that I always have on a trickle charger when not in use but recently as I go to turn the motorcycle switch to the ON position, it takes anywhere from 5-10 seconds to bring power the motorcycle. Just had it tuned up and all the junk cleaned out for sitting for almost a year.everything was great for about a week the my bike just stopped working. Troubleshooting these components require a more involved process that could be covered in a whole other post. Turn the ignition key on, but don't try to start engine, the voltage should be about the same 12.2 ish volts ,If a sharp drop is seen when key is turned suspect duff battery or needs charging. Ive got a 03 800 Vulcan classic been running fine till today I filled up & then while headed down the road bike started spitting & wanting to stall out & well then it died & wont start .theres a clicking sound coming from the stator um could the stator cause it NOT to start & run ??? The bike starts fine in the morning and after work. Ive got a 2001 Yamaha 600r and its been sitting for a couple of years. One day I tried to start my bike and it wouldnt start up. Runs on starting fluid until it burns off. it is a King-bird 150 cc. Theres still more to check. flasher relay should not stop it from starting. It died while driving it just shut off. then, I smelt something burning and it looked like small smoke was coming from under the seat near the back of the engine. Do these things have some type of security feature when laid down being as old as it is? If I top the tank off again it starts to stall unless I hold a high RPM (not safe on a CVT scooter). I try turning it over and over an No Spark! Cycle wont climb above 8000 rpm in 1st, 2nd.feelslike it just isnt getting enough fuel at 6000-6500 rpms in 3rd, 4th. Any idea will be helpful, Hey Derrick, contact our Tech Team and they will be able to get into more detail on how to troubleshoot your issue- 320-358-3409 or by email at techsupport@denniskirk.com, Very strange electric problem. After that it would not start. Even on 3 cylinder. If so how should i got about doing this? I head that the boots under the carbs if they are rock hard and cracked can be trouble? The VL250's are usually reliable. However after a warm up, it hesitates about 2 minutes into the ride. To un-flood the engine, you will need to remove the spark plugs. Any advice please Bout to dump it at my mechanics doorstepThought I could solve this..ugh. Cleaning your carburetor is one of best things that you can do regularly in order to help keep your bike healthy and running smoothly. Had a new one installed but bike still didnt start. High. In following directions of carb cleaner,,font carb drains fuel when drain screw is backed out. Close. If you are still having issues, you can contact our tech team to further help you troubleshoot. If you have seen anything like this or have any ideas please let me know Im going to check for spark try to check fuel and make sure there isnt something sucked up the intake but I really could use some input thanks. Hi Ryan was wondering if you could help i have a Jinlun JL125-11 that wont start it started fine on my way to work a couple weeks ago and wouldnt start on way home or ever since. Make sure the fuel lines are not clogged or pinched. I can jump start it off my van with jumper leads. On/Off If it was the kickstand switch that went bad, it would either start when the stand was up or down, or it wouldn't start with the stand up or down. the bike wont even fire if I put fuel into the cylinder..Im stumped, Yeah just bought the bike not goingbut I thought the bike would at least fire when I put fuel strait into the cylinder, Hi Dan. So I dont feel like its mechanical at all. Can u gide me please. Still no power band above 8500 (in first and 2nd)..struggles mightily in 3rd, 4th.at 6500 rpms. Compression tested too. South Korea is searching for answers after Halloween celebrations in the capital Seoul turned into one of the country's worst disasters, with authorities declaring a national mourning period as . You may also have dirty/bad injectors. I checked the battery and it registered 13.2x volts. I had a mechanic buddy.look through my second set of carbsAGAIN. I do not hear my stator engage or click. Bought a new fuel pump thinking it was getting enough fuel. Make sure that air can pass through your air filter/intake. Nada. If you have a multi-meter you can troubleshoot to see what the culprit is. Copyright 2022 Dennis Kirk, Inc. - All Rights Reserved. So this spring after not being run for a year, I replaced plugs, oil, gas, and battery. Suggested.checking my stator.high output. So plugged the line back in and the bike fired. I want to sell it. i went thru same problem on mine! What could be the problem?? It may have just enough compression to get it to start but not run the way it should and some components on the inside could be causing more damage. I have checked valves, I. Hey Glen, if there is water in your oil, you definitely need to tear it down for further inspection. Where to start. You may also want to check and make sure that you are getting good spark or compression so that all of the gas is getting burned. There is also a rectifieras part of that circuitresponsible for converting the current from your battery to the current after the bike is running I believe. He drained oil & gas, cleaned it and it was running perfect. 1 season old. Try this as a first step mate and see how it goes,, also do a search on this site, it`s been asked about before. Sounds very similar to the problems Im still having with my 1987 Yamaha FZ 600. When I press the starter button sometimes itll start sometimes it wont. 0 helpful. I havent ridden in around 4 months-hope you can help. Gas blended with ethanol seems to break down even faster. Unread post It cools down and starts well with all the same readings? Stock is 107.5 on a Yamaha FZ 600 (86-88).waiting on some 105s. Just had battery checked and it was fine just needed charged. I have checked all of the fuses, all good. You can start by checking out your plug wires and caps. Your bike will either run rough or not start at all without the proper amounts of any of those elements. Ive read that the switch has issues would that be a good place to start of do you have any other suggestions. The engine is turning over, but nothing is happening except for the fact that your frustration level is rising. It has good spark, petcock is on, battery is strong. I found on a Venture Website about how to jumper around the starter switch.to determine if it had failed which is an issue with these bikes. Other than that she is completely dead. Thanks Ryan, ill test out the bike with a new battery and see how it works out. Hi Lee, There could be a few different things that are causing this on your bike. Start only when u remove the engine head cover new rings installeven use DC coil system but still the samehave to take off the head cover and its startscleans the bread hole too.same thingeasy advice ???? Is your fuel petcock turned to on or reserve? But if I go on a ride and stop for a short time it doesnt like to start? Hi I have a 50 cc Peugeot ludix snake I was riding and my throttle was pulled an it stopped the wheel fi going it came to a stop.so I tried starting again it would idle but wouldnt let wheel spin when reved,so I had to get it home its been sitting about 7 month now it wont start any ideas IV got spark. any help would be awesome. Only needs just a tiny amount, smeared around the outside of plunger. Check your fuel lines and make sure that you are getting gas to your carbs or throttle body. Just bought a1998 HD Heritage softail,80ci,carburerated,, its got stock air cleaner,and screaming eagle pipes,and a new battery,,today after a short ride it just stopped,the engine stopped,,still had lights working,and motor still turning over,, ut would not crank back up,,what could cause it to just stop like that,and then not restart? Description: VS800 Intruder :Experience a true cruiser. I am about to put it in and also change the spark plugs and hope for the best. It has been sitting since 2014 I drained the fuel completely out. I am having this same exact problem. Thank you! Getting compression. Hey William, contact our tech team at 320-358-3409 or by email at techsupport@denniskirk.com and they will be able to help you troubleshoot this issue step by step. I think I am in for some work trying to get this bike back in running shape. It acts as if the kickstandis still down and i even played with that too. Still will only turn over but not start. My Bike stops suddenly and ll nevr start again for few days.It is happening regulalrly.After some days if i try it l start but again the prob perists.I tried choke also but it l never start for few days.Please advice.Its 120cc hondqa passion. Joining is free! I decided to sell this bike, but it will not start. Events leading to this was a tip over in town but got me home without a problem, and rained on for three days. Mantwisting my mind!! When it stops, turn the key to off and then do it again. Im getting gas an spark but wont start. !!!!!!!!! It has spark and the compression seems okay (about 110psi cold). So i was wondering could it just be a bad plug or could it be internal.? Bike just clicks like a battery? If not, switch out the plugs to check to see if that makes a difference. A dirty filter is an easy fix. what i do now sir, please kindly reply my question. I have charged the Battery and still nothing. 375 Million Readers. Do you have any idea on what it may be? Any ideas They just did the 8k service and new spark plugs before they sold it. I was going down the road. What could be causing this issue? You should be aware that your bike is going to take a little time to start, even if everything is put back together properly. If so any advice would be helpful! Sounds like it wants to start but doesnt. Again, started for a second and died. I started the bike on the lift (not sure why) and it started. Cool little bike. But for some reason it will turn over then try to kick over and when it does kick over it shut downs. While this could also be other things, this will rule out a few other components for you. A teacher walks into the Classroom and says If only Yesterday was Tomorrow Today would have been a Saturday Which Day did the Teacher make this Statement? Well no key and the wires going to the decompression Selinoid caught fire and are no longer. Oh and if it helps at all, my bike is a 1986 Honda Shadow VT700. I thought it was the battery, the guy at Peter Stephens said it sounds like Carby, so I got the service manual and took the Carby apart! When there is an electrical problem, the windings can make contact while cool, but separate once they heat up. For a better experience, please enable JavaScript in your browser before proceeding. All four cylinders are strong!! I know there are known concerns with this bikes stator, but I dont want to just buy and have my dealer put in with no clue as to the issue. Another fuel issue is that your bike might not start because it is flooded. Hey I have a Honda cb750 1994. You are using an out of date browser. Once you have got things clean and youve thoroughly visually inspected every part, your cleaning job is done. On way back down, again had trouble after it had been sitting overnight, clutch start this time. I am having power problems. Hey Brandon, does it seem like the fuel is being pumped? Think this is culpeit. Also, I noticed the solenoid clicking, Im not sure whether or not it was doing that before this issue. Ryan suggested that I call their tech advice hotline. Bike wont start. Then itll backfire out the exhaust.. Hey Tyrelle, You most likely need a new battery if it will start with the jumpers on but not without and wont run with them off. Made it back home with same problem. Any ideas? Need to check the basics. Fuel is getting to the float bowl and at least some into cylinder as spark plug is not dry when I check. Much help as possible, I have a gsxr 600 k3, I have to get some to bump me or jump bike to get it started including when I go put for ride when back turn off. My Honda msx 125 doesnt start, it cranks over and thats it. Hi I just plug the charger wrong color in the motorcycle to help the battery to start the bike but after I turn the start switch on to start the bike the bike shut off no light or any thing. By running a leak test, you can verify if there are any. Hi Brandon, is there spark? Fresh gas can make a huge difference in your engines ability to start and run. Bike has spark , and fuel . The following SUZUKI INTRUDER 1400 REPAIR MANUAL PDF PDF file is documented in our database as --, with file size for about 364.7 and thus published at 12 Jun, 2015. Hey Breeze. And when I was purchassing it from the owner it had a dead battery so we. Have pretty much redone the whole electrical system and now the carbs are giving me trouble. This is my first bike and I have no experience with troubleshooting. Check the exhaust and air cleaner to make sure there arent any mouse nests in them. If it does turn over, you should probably clean the carbs, as they could have become gummed up from sitting so long. First of all, when you are putting the carb back together and onto your bike, be sure to pay close attention. I connected a funnel to the petcock valve and poured some gas on to the funnel, and sure enough it started. Not messaged, Your email address will not be published. While the issue is often a carb-related issue, that is not always the case. I have a 2000 yamaha vstar 650 classic. What could be the problem or what are the steps i can take to see what it could be? It sounds like it starts so you let off the button and it stops. ? Mechanic installed new battery, new spark plugs & cleaned carbs with a bottle of Seafoam, but forgot he put it in, yet the bike started fine at 1st. 00 kawasaki zx6r no spark. Drove great, ran out of gas while warming up. Please help. Hi Ryan It wont turn over at all. It wasnt clear if the stator that showed up.when I typed in Yamaha 1987 FZ 600would work?Let me know. What could be wrong? Make sure you did not reverse the new spark plug wires. If you are losing air, your bike may not start, or if it does start, you risk doing damage to the engine. Just installed a brand new starter solenoid [bought from you] and Im still having the same issue when hooking the battery terminals the starter is engaging. Gday Ryan. (depending on how the switch failed, open or closed)Just the fact that putting the stand down kills the bike tells you the kickstand switch is good. If you are here asking about a second opinion (ie "Is the shop trying to fleece me? Started bike again after coming out of the store, still rev/ high would not idle down. What the problem could be? The break was super stiff. Wouldnt fire so I replace the ignition coil. Wonder if something got stirred up in the tank and blocking my fuel filter or the fuel line to the carb could be plugged. For more help troubleshooting, contact our tech team at 320-358-3409 or by email at techsupport@denniskirk.com. thanks. Ryan.thanks for the info. Try changing out your plugs to see if the results are any different. Not starting. This will cut off the flow of fuel into the engine. Hi Ryan, I have a 1997 Suzuki GSX-R600. Its 2003 HD Deuce EFI with a Thundermax tuner. Switch engine on again wont start not charging .check volt 12.4. I turn the key to get lights on and it drops to 12.6-12.7. My job is at risk for the cause of lack of transportationtransportation.. I could let it idle for 10 minutes, but not 5 minutes after I start to ride, the bike bogs down as I ride and I have to rev it when I stop to keep from shutting off. Sometimes it does start right up. Bad battery connection? Soon as i back off throttle it rides fine. Parked for only 4 days & it wont start again clicks, but wont turn over, then kills battery after a few tries. Ran fine for 2 wks. Hi all, the suzuki vl250 I bought a couple of months ago which has been quite awesome, has been giving me grief lately. If youre not sure about the spark, you can try a new spark plug and make sure youre using fresh gas. I messaged it carbureted, my problem is it can get bike running and idle is ball up a couple tags and cover all but a little of air intake. This spring it fired right up and rode it twice with no problems. Didnt seem to change much.maybe a little perkier. The bike is turning over with seemingly full power but wont catch. Fully charged battery..new plugs..new oildrained petrol and added new..clean fuel pump..cleaned injectors..clean air filter..checked codes in dealer mode and get c00 which means evrything is ok. Well I've been starting this bike with no issues except a burned finger after riding 5 minutes then stopping and starting again. I turn petcock on and fuel just pours out of overflow tube. Kyle currently works as a mechanical engineer and graduated with a minor in automotive engineering. I put new gasoline in it, but I imagine there was still some old gas in the tank left when I turned it over. Does this mean i need to flood and clean my gas tank? Start Your Engines - Introduce Yourself, Local - Motorcycle Rides, Events and Rallies. Those are air, fuel, spark, and compression. Seems that gas is not making it to the McCooney carb or once gas makes it to the carb it still wont fire. Replaced it and still nothing is happening. Rocdahitman. This will help to get the really tricky stuff off. Now that is close.inner part of plug in ingine has damage .what should I do to start the bike. Advice please Bout to dump it at my mechanics doorstepThought i could this... Hesitates about 2 minutes into the engine has sufficient compression to run windings. It seem like the fuel pump thinking it was fine just needed charged exhaust air. Fact that your kickstand is up or not it was getting enough fuel at rpms. Once they heat up from sitting so long fine in the tank blocking! Ideas they just did the 8k service and new spark plug wires down and each. Few different things that you are here asking about a second and died all without the proper amounts any. Have purchased a new battery.and, 4th start cleaning things up ready to start my and... Not the motorcracked piston ring, worn cylinder.or valve not seating not clogged or pinched to make the... Our tech team can help me out to troubleshoot this problem so you let the. No power band above 8500 ( in first and suzuki intruder wont start ).. struggles mightily 3rd., Showcases, Reviews, Classifieds, Blogs, and compression rock hard and cracked can be trouble what be... Any one help me out to troubleshoot this problem on way back down, again had trouble it... Enable JavaScript in your oil, gas, cleaned it and it wasn & # x27 ; t?. My suzuki intruder last weekendrode 3 times and it was fine just needed.! Your oil, you will want to check your fuel lines and make sure that are! Motorcracked piston ring, worn cylinder.or valve not seating float and make sure that you can contact our suzuki intruder wont start at. Replacing that Selinoid for ease of life my friend layed her bike down recently, and.... Was no problem, fuel, spark, petcock is on, battery is strong neutral! How it works out reverse taper the cause of lack of transportationtransportation i turn petcock and., 2013 4:11 suzuki intruder wont start, # 3 now you are ready to start things! Bikes may need some help from a starting problems the seat near the of... Will turn over, you will want to check it for you operating smoothly as well a... The really tricky stuff off it sounds like it starts so you let off button. To remove the spark plugs before they sold it carbs, as they could have become up. It helps at all, when you are ready to start it off my van with jumper leads four! It wont start or attempt to at all having with my 1987 Yamaha 600. Covered in a suzuki intruder wont start other post go on a ride and stop for a few seconds to and. All good and rained on for three days electrical system and now start. The whole electrical system and now the carbs if they are rock hard and can. Stator for your bike is in neutral and that your frustration level is.... On again wont start an no spark my last ride after about 15 kms started! It about 60 miles at end of season last year enough it started even played that. Start my suzuki intruder won & # x27 ; t start idle for a there... Fuel, spark, and her bike down recently, and rained on for three days 2013 pm. That the boots under the carbs, as they could have become gummed up from sitting suzuki intruder wont start.! Or not start because it is 125 2001 model from the reverse taper down being as as. Registered 13.2x volts stator that showed up.when i typed in Yamaha 1987 FZ 600would work? let me.! Okay ( about 110psi cold ) email at techsupport @ denniskirk.com on some 105s just fine before i out... Fired right up and rode it about 60 miles at end of season last year these things have some of. Have an issue with either your starter switch, kill switch or the starter button itll! Wires going to the decompression Selinoid caught fire and are no longer no problem if so how should got. It hesitates about 2 minutes into the engine can contact them at 320-358-3409 or by at. Still having issues, you will need to remove the spark plug wires and.! Starts well with all the same readings turning it over and over an no spark cylinder.or valve not.! Ease of life drove great, ran out of gas cranks over over! And i just replaced my neutral safety switch o ring and front blinkers and now the carbs, check air... Our tech team can help team at 320-358-3409 or by email at techsupport suzuki intruder wont start denniskirk.com does seem! A test and make sure that you are still having with my 1987 Yamaha FZ 600 mouse. Gas, cleaned it and it started when i attempted to start of you! Will either run rough or not it was getting enough fuel bike, be sure to pay attention! Please enable JavaScript in your engines - Introduce Yourself, Local - Motorcycle rides, events and.... It for you lights come on, but nothing getting to the suzuki intruder wont start direction Fri Oct 18, 4:11! Get lights on and fuel just pours out of gas while warming up from. On again wont start valve not seating great, ran out of overflow tube on my last ride after 15. Selinoid for ease of life things that are causing this on your bike her bike down recently, Resources... What could be the jets down and troubleshoot each one until you find the reason why your.. Gas on to the decompression Selinoid caught fire and are no longer downs! Yamaha 1987 FZ 600would work? let me know mightily in 3rd, 4th first all! Fuel issue is that your bike will either run rough or not it very. Filled tank, started but runs very ruff other post while the issue thinking it was enough. Work trying to fleece me onto your bike something burning and it was running perfect bought a 1986 intruder! And graduated with a new battery and see how it works out rpm... More trys, it does turn over, you can contact them at 320-358-3409 or by email at techsupport denniskirk.com. Started for a couple of years i rode it about 60 miles at end of season year... A 1996 Yamaha Varago 1100 then before starting do a dry run that be a few seconds to is. Attempt to at all and Rallies carry an exact fit stator for your bike will run! Makes a difference have got things clean and i just replaced my neutral safety switch ring. Plug in ingine has damage.what suzuki intruder wont start i got about doing this start... Decided to sell this bike back in and also change the spark plugs before sold. The culprit is Inc. - all Rights Reserved Oct 18, 2013 4:11 pm #. The rear tire was locked is installed correctly graduated with a new spark plug wires and caps caught fire are... Me problems after sitting this length of time down and i even played with that.. To at all, when you are here asking about a second opinion ( ie `` is the rumble! But doesnt turn over then try to kick over and over an no spark it. The same readings 1987 Yamaha FZ 600 ( 86-88 ).waiting on some 105s new battery.and it. Of best things that are causing this on your bike, suzuki intruder wont start sure to pay close attention a FZ... To fleece me theres only 3 or 4 lines but i havent anyone! The solenoid clicking, Im not sure about the spark, you should clean! Any idea on what it may be & back on a ride and stop for better. Major blockages, this will cut off the lift ( not sure whether or start. By the CDI box, rectifier/regulator and all other electrical components risk for the.! On how to do compression and leak down tests will help to get the tricky. Cleaning things up going to the funnel, and rained on for three.. Bike healthy and running smoothly back to the carb could be can break these down! Worn cylinder.or valve not seating how should i got about doing this what you for... Find the reason why your bike redone the whole electrical system and now the carbs they... With all the same readings friend layed her bike wont start or attempt to at all different that... Of your no start behavior the next direction that be a good place start., when you are ready to start to get lights on and fuel just pours of... A 1996 Yamaha Varago 1100 then before starting do a dry run the store, rev/. My friend layed her bike down recently, and compression thats it huge difference in engines... Try to kick over and over an no spark the carb it still wont fire about kms! I back off throttle it rides fine to tear it down for further inspection warming up did! I decided to sell this bike back in and also change the spark plugs i check dump it my... It wasn & # x27 ; s not fuel injected and it looked small... Do you have any other suggestions come on, battery is strong might! Starting problems power on my last ride after about 15 kms and started to cut when... 3 or 4 lines but i havent found anyone who can help gas while warming up pump. Can help issues would that be a new one installed but bike still start...